FLAT & CURVED TEMPERED GLASS

Tempered glass is made from annealed glass through a tempering process in which the glass is heated till its softening point and then rapidly cooled. This gives the glass its strength. A full tempered glass is 4 to 5 times stronger than and annealed glass of similar thickness. A fully tempered glass is regarded as a safety glass and when it breaks, it breaks into small blunt pieces which greatly reduces the chances of injuries.

We have the largest machine in the Gulf in terms of producing a single sheet of Flat and Bent Glass, as per our latest knowledge.

 

Toughened glass provides greater thermal strength. It provides great resistance to unexpected sudden changes in temperatures, as well as withstands different temperatures, as well as withstands different temperatures as compared with normal annealed glass at same specified conditions.

Toughened glass is used when strength, thermal resistance and safety are important considerations. The most commonly encountered tempered glass is that used for side and rear windows in automobiles, used for its characteristic of shattering into small cubes rather than large shards. Tempered glass is also used in buildings for unframed assemblied (such as frameless doors), structurally-loaded applications and for any other application that would become dangerous in the event of a human impact.

BENEFITS OF TEMPERED GLASS

• Strength: 4-5 times stronger than Annealed Glass
• Safety: When broken, the glass breaks in to small blunt pieces, thus reducing the chances of injury.
• Edge Strength: High edge strength enabling the usage of Spider fitting and Point Fixed Glazing.
• Thermal Breakage: It can withstand chances of thermal breakage because its significant higher edge strength.
• Resistant to scratches, shock and wind pressure.
• Used by wide range of industries for variety of application.

TECHNICAL DATA (FLAT)

• Max. Size: 3300mm x 6000mm
• Min. Size: 300mm x 320mm
• Can produce from 5mm to 19mm.
• Can temper Clear, Tinted, Reflective, Low-E glass and Enameled glass.
• Biggest single sheet producing machine in the Gulf as per our current knowledge base.

TECHNICAL DATA (CURVE)

• Max. Size: 3300mm (C) x 4200mm
• Min. Size: 600mm (C) x 400mm
• Can produce from 5mm to 19mm glass.
• Can temper Clear, Tinted & Reflective Glass.
• Biggest single sheet producing machine in Gulf as per our current knowledge base.

Page 1